Lexmark MS818dn Printer Manual - Page : 207
Understanding the printer menus
WiFi Protected Setup
Establish a wireless network and enable network security.
Start Push Button Method
Start PIN Method
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given period of time.
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Enable/Disable WPS Autodetection
Automatically detect the connection method that an access point
with WPS uses--Start Push Button Method or Start PIN Method.
Disable is the factory default setting.
Specify the network mode.
Infrastructure is the factory default setting. This lets the printer
access a network using an access point.
Ad hoc configures wireless connection directly between the
printer and a computer.
Specify the wireless standard for the wireless network.
802.11b/g/n is the factory default setting.
Select an available network for the printer to use.
View Signal Quality
View the quality of the wireless connection.
View Security Mode
View the encryption method for the wireless network.
To access the menu, navigate to either of the following:
> Standard Network
> Standard Network Setup
> Network [x]
> Network [x] Setup
Enable or disable AppleTalk support.
No is the factory default setting.
Show the assigned AppleTalk name.
The AppleTalk name can be changed only from the Embedded
Show the assigned AppleTalk address.
The AppleTalk address can be changed only from the Embedded