Olympus Ferrari Digital 2004 Camera Manual - Page : 1

VT926801
QuickStart Guide
OLYMPUS AMERICA INC.
Olympus Europa GmbH
Two Corporate Center Drive, Melville,
Wendenstrasse 14-18,
NY 11747-3157, U.S.A.
20097 Hamburg, Germany
http://www.olympus.com/
http://www.olympusamerica.com/support
http://www.olympus-europa.com
DIGITAL MODEL 2004
UNPACKING THE BOX CONTENTS
START HERE
Gather your digital camera and the parts as shown in the illustration. You'll need these to complete the steps for the camera set-up
procedures that follow.
It is strongly recommended that you follow these
step-by-step numbered instructions to set up and
quickly begin using your new Digital Camera.
AC adapter (D-7AC)
Lithium-ion battery (LI-20B)
CAMEDIA Master CD-ROM*2/
Digital camera
Cradle
Reference Manual*1
Software installation guide
For more detailed instructions on advanced features,
xD-Picture Card/Instructions
please refer to the Reference Manual*1.
Strap
USB cable
AV cable
*1 Reference Manual is provided on CD-ROM in some
The following items are also included in this package: lens cap, lens cap string, camera case (with camera cleaning cloth), warranty card and registration card (not
areas.
pvovided in some areas).
*1 Reference Manual is provided on CD-ROM in some areas.
*2 The instruction manual included on the CAMEDIA Master 4.2 CD-ROM is provided in English only.
PREPARE THE CAMERA FOR USE
b.
Charging the battery
Before you begin using your Olympus digital camera...
blinks during charging.
To the AC wall outlet
AC plug
a.
Loading the battery
Cradle (provided)
Monitor
6
3
Lift up the cover and push down
Slide the battery/card compartment Gently push the latch backwards to lift it .
firmly on the section of the cover
cover in the direction of the arrow
When you take your finger off the latch, the
7
to close. Closing the battery/card
. The cover unlocks and opens in
1
latch drops back on its own . After the
4
compartment cover locks the latch.
the direction of the arrow .
2
latch drops back, insert the battery .
5
DC-IN jack
Close the battery/
c.
AC adapter (provided)
Inserting the card
Open the battery/card
Release the latch
card compartment
compartment cover.
to insert the battery.
cover.
1
3
1
7
5
4
6
2
3
2
4
Battery/Card
5
Latch
compartment cover
Notch
Unloading the battery
Insert the card while keeping it
Removing the card
Release the latch . W
3
4
ith the
straight.
Insert the battery with the
3
battery held down, tilt the camera
When the card is inserted
Push the card all the way to
OLYMPUS logo face up.
carefully so that the battery does
all the way, it stops with a click.
unlock it, then let it return
4
not drop from the camera.
slowly. Hold the card straight
5
Remove the battery .
5
and pull it out.
Names of parts
Shutter button
Flash
Microphone
Connector end
Control dial
Lens
Cradle connector
BACK/NEXT button
Zoom button
(
W /
T )
Mode switch
Monitor
( / / )
Battery/Card compartment
DC-IN jack
Cradle
Strap eyelet
cover
POWER
MENU/OK button
switch
Tripod socket
(provided)
A/V OUT jack
Speaker
Self-timer lamp
USB connector
TURNING ON THE CAMERA
3) Select from the SETUP menu.
Set the date.
The "year" is highlighted. The first two digits of the
a.
2
Power on/off
Indicates there are more menu items
year are fixed.
following SHUTTER SOUND.
Mode switch
Rotate to
: Select this for still pictures shooting.
select
SETUP
1
: Select this for movie shooting.
Rotate to
REC VIEW
ON
01
01
select
Lens cap
: Select this for playback.
ENGLISH
Remove this when taking
Press to confirm
SCREEN
1
00
00
SET
pictures.
SHUTTER SOUND
1
CANCEL
BACK
SELECT
GO
OK
EXIT
BACK
SELECT
GO
OK
MENU/OK
Currently selected item
Repeat the procedure until the date and
time are completely set.
Rotate to
The time is displayed in the 24-hour format.
select
SETUP
3
For example, 2 p.m. will be displayed as 14:00.
'04.01.01
00:00
Rotate to
POWER switch
VIDEO OUT
PAL
select
Monitor
Turns the camera on and off.
Press to confirm
Power on T Turns on the monitor.
* Check the date/time settings
07
30
Power off T Turns off the monitor.
when the camera is turned on.
EXIT
BACK
SELECT
GO
OK
Press to confirm
MENU/OK
12
00
SET
b.
BACK
Menu & operation (date and time setting)
4) Set the date/time.
CANCEL
SELECT
GO
OK
MENU/OK
The following instructions show the procedure used when the
date and time settings are set to Y-M-D.
5) With the cursor on SET, press MENU/OK.
1) Display the menu.
2) Select SETUP.
Select the date format: [Y-M-D (Year/Month/Day)],
The clock starts after completing step 5 .
The current setting is displayed.
[M-D-Y (Month/Day/Year)], [D-M-Y (Day/Month/Year)].
Rotate to
Rotate to
P
select
P
SCENE SELECT
select
P
AF MODE
SPOT
Press to confirm
07
30
Press
RESET
OFF
2004
01
01
FLASH MODE
AUTO
FORMAT
Y
M
D
12
15
SET
OFF
Press to confirm
SETUP
MENU/OK
Press to confirm
MENU/OK
00
00
SET
SH 3M
CANCEL
BACK
GO
OK
EXIT
BACK
SELECT
GO
OK
EXIT
BACK
SELECT
GO
OK
CANCEL
BACK
SELECT
GO
OK
MENU/OK
MENU/OK
The operation guide is displayed.
Printed in Japan